Audio Technica at 2035 Studio - Essential Studio Kit

Dieser Artikel steht derzeit nicht zur Verfügung!
379,19 € *

inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 5 Tage

  • MB23508
  • 5055145749906
  • AT2035 Studio
AT2035 Kondensatormikrofon mit Richtcharakterisitk Niere (199€) ATH-M40x... mehr
Produktinformationen "Audio Technica at 2035 Studio - Essential Studio Kit"
  • AT2035 Kondensatormikrofon mit Richtcharakterisitk Niere (199€)
  • ATH-M40x professioneller Studiokopfhörer (129€)
  • Exklusives, Audient iD4 Black Audio-Interface (169€)
  • Kostenlose Software (560€)
  • Bundle im Wert von 1057€ - spare 668€
  • Nur erhältlich in: UK, Frankreich, Spanien und Deutschland


Kopfhörer

  • Typ  Closed-back dynamic
  • Treiberabmessung  40mm
  • Magnet  Neodymium
  • Schwingspule  CCAW (Copper-clad aluminum wire)
  • Max. Eingangsleistung  1,600 mW @ 1KHz
  • Empfindlichkeit  98 dB/mW
  • Impedanz  35 ohms
  • Faltbar/Zusammenklappbar  Yes
  • Gewicht  240g (without cable)
  • Kabel - Abnehmbar  Yes
  • Anschlussstecker  Gold-plated stereo 1/8” (3.5 mm) connector with 6.3 mm (1/4”) screw-on adapter
  • Beiliegendes Zubehör  6.3 mm (1/4”) screw-on adapter, Pouch

 

Mikrofon

  • Element  Fixed-charge back plate, permanently polarized condenser
  • Richtcharakteristik  Cardioid
  • Frequenzbereich  20 - 20,000 Hz
  • Empf. am offenen Schaltkreis  -33 dB (22.4 mV) re 1V at 1 Pa
  • Impedanz  120 ohms
  • Max. Eingangspegel  148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
  • Trittschallfilter  80 Hz, 12 dB/octave
  • Dynamikumfang  136 dB, 1 kHz at Max SPL
  • Geräuschpegelabstand  82 dB, 1 kHz at 1 Pa
  • Phantomspeisung  11-52V DC, 3.8 mA typical
  • Gewicht  403g
  • Abmessungen  170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
  • Ausgangsanschluss  Integral 3-pin XLRM-type
  • Beiliegendes Zubehör  AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

Audio Interface

MICROPHONE PREAMPLIFIER:

(measurement includes ADC signal path)
MIC GAIN: 0 to 58 dB
LINE GAIN: -10 to 48 dB (-10dB hardwired line pad)
PHANTOM POWER: 48V ±4V @ 10mA/Channel
MIC EIN: <-126.0 dBu
CMRR: >75 dB @ 1kHz
MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital Maximum)
INPUT IMPEDANCE (Mic): 2.8 kO Balanced
INPUT IMPEDANCE (Line): >8kO Balanced
FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz @ min. gain
±1.0 dB 20Hz to 22kHz @ max. gain
CROSSTALK: <-91 dBu
THD+N @ 0dBu (1kHz): 0.0015% (-96.5dBu)
SNR: 96 dB un-weighted, 99 dB A-weighted
XLR Combi Female Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield)
D.I (Channel 1):
D.I GAIN: -5 to 35 dB
MAXIMUM INPUT LEVEL: +8 dBu (0.6% THD typical)
INPUT IMPEDANCE: >500kO Unbalanced
FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz
THD+N @ 0dBu (1kHz): <0.1% all musical 2nd and 3rd harmonics

Typically 0.05% at 0dBu
SNR: 87 dB un-weighted, 90dB A-weighted
1/4” JACK: TIP (Hot) & SLEEVE (Shield)
ANALOGUE TO DIGITAL CONVERTER (ADC 1 & 2):

(measured sans microphone preamplifier under AES-17)
MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital maximum)
DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS
FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist)
CROSSTALK: -100 dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.001% (-100 dB)
THD+N @ -6dBFS (1kHz): <0.0011% (-99.1 dB)
DYNAMIC RANGE: 112 dB un-weighted
114 dB A-weighted
DIGITAL TO ANALOGUE CONVERTER (DAC 1&2):

(measured under AES-17 at line outputs 1&2)
MAXIMUM OUTPUT LEVEL: +12 dBu (0 dBFS digital maximum)
DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS
OUTPUT IMPEDANCE <100O
FREQUENCY RESPONSE: ±0.1 dB 10Hz to Fs/2 (flat to nyquist)
CROSSTALK: <-104 dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.0015% (-96.5 dB)
DYNAMIC RANGE: 112 dB un-weighted
115 dB A-weighted
1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield)
DUAL HEADPHONE OUTPUT:
MAXIMUM OUTPUT LEVEL: +12 dBu (0dBFS digital maximum)
DIGITAL REFERENCE LEVEL: +12 dBu = 0 dBFS
VOLTAGE GAIN: +6 dB (optimised for loudness)
OUTPUT IMPEDANCE: <30 O Balanced
FREQUENCY RESPONSE: ±1.0 dB 10Hz to Fs/2 (load dependant)
CROSSTALK: -98 dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.0012% (-98.4 dB)
DYNAMIC RANGE: 106 dB un-weighted
108 dB A-weighted
MAX LEVEL INTO 30ohms: +3 dBu, 0.008% THD+N, Power: 80mW
MAX LEVEL INTO 60ohms: +6 dBu, 0.005% THD+N, Power: 80mW
MAX LEVEL INTO 600ohms: +12 dBu, 0.0025% THD+N, Power: 31mW
1/4” TRS JACK: TIP (Left), RING (Right) & SLEEVE (Shield)
1/8” MINI JACK: TIP (Left), RING (Right) & SLEEVE (Shield)
USB 2.0 HIGH SPEED:
BUS POWER: 500mA @5V System Limit
420mA @5V Maximum (No 48V)
No. of INPUT CHANNELS: 2 (2 Analogue)
No. of OUTPUT CHANNELS: 2 (2 Analogue)
DSP MIXER LATENCY: ROUND TRIP (in-to-out)

44.1kHz 1.583ms
48.0kHz 1.458ms
88.2kHz 0.792ms
96.0kHz 0.729ms
COMPATIBILITY:

iD4 supports the following operating systems:

    macOS 10.7.5 and later
    Windows 7 and later
    iOS 6 and later

*  To use iD4 with an iOS device a camera adapter kit and a powered USB 2.0 hub is required.
POWER SUPPLY:

USB2.0 Powered (2.5 Watts Maximum)

Weiterführende Links zu "Audio Technica at 2035 Studio - Essential Studio Kit"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Audio Technica at 2035 Studio - Essential Studio Kit"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Zuletzt angesehen