Dynacord C1300FDI-EU

730,12 € *

inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 5 Tage

  • MB30075
  • 8717332992294
  • C1300FDI-EU
DSP Leistungsverstärker 2 x 650W @ 4 Ohm mit FIR Drive, 70V Ausgang, GPI remote power... mehr
Produktinformationen "Dynacord C1300FDI-EU"
DSP Leistungsverstärker 2 x 650W @ 4 Ohm mit FIR Drive, 70V Ausgang, GPI remote power

Maximum Output Power, SIngle Channel 2O=1100W; 2.6O= 950W; 4O= 660W; 8O= 350W (Load Impedance)
Maximum Output Power, Dual Channel 2O=1000W; 2.6O= 850W; 4O= 600W; 8O= 320W (Load Impedance)
Maximum Output Power, Bridged High Impedance= 2O & 2.6O=1x 600W; Load Impedance= 4O=2000W; 8O=1200W;

 

Maximum RMS Voltage Swing, THD = 1%, 1kHz 55.3V
Voltage Gain ref.1kHz 32.0dB
IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
DIM 30 < 0.05%
Maximum Input Level +21 dBu
Crosstalk < -80dB
Frequency Response 10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced 20kO
Signal-to-Noise Ratio (A-weighted) >104dB
Output Noise , A-weighted < -68dBu
Output Stage Topology Class AB
Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption 550 W
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Safety Class I
Available Color Black
Height 88mm (3.46")
Width 483mm (19.02")
Depth 462.4mm (18.2")
Weight Net 12.9kg (28.44 lbs)
Signal Processing FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance
Direct Drive Load Capability 70V: 1 x 625W (0.0 dB)*
High Impedance Operation 70V (in bridged mode)
Operating Temperature Range +5°C to +40°C (40°F to +105°F)
Remote control SONICUE sound system software (requires firmware 2.0)
Remote Power ON/GPIO Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Total Harmonic Distortion < 0.05%
Weiterführende Links zu "Dynacord C1300FDI-EU"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Dynacord C1300FDI-EU"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Zuletzt angesehen